CAD Drawings - Gas Fires
The Fireplace Ltd FIREGUARD WARRANTY STATEMENT:
Installations of all Gazco gas fires must be carried out and commissioned by a registered gas fitter, trained & familiarised with the appliances we distribute and in conformance with the relevant NZ Standards. All gas fires need to be serviced annually to the terms and conditions of The Fireplace Ltd FIREGUARD Warranty, to qualify: Ph (09) 623 6996
NZS 5261:2003 was replaced by AS/NZS 5601.1:2010 on 1 January 2013. Please note that AS/NZS 5601.1:2010 has been replaced by AS/NZS 5601.1:2013, but the Gas (Safety and Measurement) Amendment Regulations 2014, which come into force on 31 July 2014, introduce a transitional provision that allows the use of AS/NZS 5601.1:2010 until 31 December 2015. Legislative changes in 1992 removed the responsibility for inspection and certification of gas installations from the gas suppliers and instituted a regime of gas certification by a person authorized under the Plumbers, Gasfitters and Drainlayers Act. Gas installations should be undertaken by persons authorized under the Plumber Gasfitters and Drainlayers Act 1976.
Gazco Gas Fires
Jetmaster Open Gas Fires
Horizon Open Gas Fires
To save the CAD files to your machine right click and save to a local folder. Drawings are in either DXF/DWG/IGES format or PDF's which can be viewed via your browser or saved to your hard drive.
NOTE: Our technical drawings are continually being updated and refined by the manufacturers. It is always advisable to consult with The Fireplace Ltd to ensure you are using/viewing the latest drawings.